Jeep Stop/Start System: How It Saves You Fuel
Save Fuel & Drive Smarter With Jeep's Stop/Start System
In the ever-evolving world of automotive technology, Jeep continues to lead the way with practical innovations designed to enhance your driving experience. One standout feature making waves in fuel efficiency and sustainability is Jeep's Stop/Start system, also known as Engine Stop Start system (ESS). Whether you're navigating city traffic in your Jeep Grand Cherokee or cruising scenic routes in a Jeep Wrangler, the Jeep ESS system is working quietly in the background to help you save fuel, reduce emissions, and maximize efficiency without compromising performance. Visit Genthe Chrysler Dodge Jeep Ram to experience this innovative technology firsthand with a test drive!
What is the Jeep Stop/Start System?
The Jeep Stop/Start system is an automatic fuel-saving technology that turns off your engine when the vehicle comes to a complete stop, such as at traffic lights or in heavy traffic, and restarts it seamlessly when you release the brake or engage the clutch. Designed to reduce idle time and cut down unnecessary fuel consumption, the Jeep Stop/Start system helps improve fuel economy, especially in city driving conditions where stop-and-go traffic is common.
Benefits of Enabling Jeep ESS
The primary advantage of the Jeep Stop/Start system is better fuel efficiency. By reducing the amount of time your engine spends idling, Jeep ESS can save up to 5-10% in fuel during urban driving. That translates to real savings at the pump over time, making it both a smart and sustainable choice for drivers. Additionally, the Jeep Stop/Start system contributes to reduced emissions. Less idling means fewer greenhouse gases released into the atmosphere, aligning with eco-conscious driving habits and helping to keep the air cleaner in our communities.
For example, if you're taking your Jeep Grand Cherokee on a daily commute through busy Saline, or you're off on an adventure in your Jeep Wrangler, Jeep ESS helps you cut back on unnecessary fuel burn at every red light. The Jeep Stop/Start system gives you peace of mind knowing you're driving efficiently without lifting a finger.
How to Use Jeep ESS
The Jeep Stop/Start system is fully automatic. Once your Jeep reaches operating temperature and the battery is sufficiently charged, the system activates. When you stop the vehicle, the engine shuts off automatically. The moment you lift your foot off the brake, the engine restarts instantly and is ready to go when you are. No special action is further needed from you, as you can just drive as you normally would, and the Jeep Stop/Start system handles the rest. The transition is smooth, silent, barely noticeable, and will save you more the next time you have to fill up.
How to Disable Jeep ESS
While the Jeep Stop/Start system is great for everyday fuel efficiency, there may be times when you'd prefer it off, like during extremely hot or cold weather when continuous A/C or heat is essential. Jeep gives you that flexibility. Simply press the "A" button with a circular arrow, which is usually located near the gear shifter or climate controls, and the system will deactivate for that drive cycle.
Keep in mind that the Jeep Stop/Start system resets and reactivates the next time you start your vehicle.
What Inhibits Jeep Auto Start/Stop?
Sometimes when you're driving and come to a stop, you may notice that the Jeep Stop/Start system isn't toggling. This could be for a number of reasons that don't necessarily mean that anything's wrong with your ride. Here's a list of situations that inhibit your Jeep's Stop/Start system:
- The Driver's seat belt is not buckled
- Driver door is not closed
- Cabin heating or cooling is in progress and an acceptable cabin temperature has not been reached
- The transmission is not in a forward gear
- The hood is open
- Battery temperature is too warm or too cold
- Low battery charge
- Driving on a steep grade
- Climate control is set to full defrost mode at high blower speed
- Climate control is set to Max A/C
- Engine has not reached normal operating temperature
- Vehicle is in 4 Low transfer case mode
- Insufficient pressure on brake pedal
- Engine temp is too high
- Minimum speed threshold has not been met after a previous auto stop
- Sharp-angled steering maneuver
If your Jeep Stop/Start system isn't working, it could also be due to technical issues such as a battery that was recently replaced, the need for a jump start, a loose or corroded terminal, or an error in the system. These problems can happen in various vehicles, especially in extreme cold, and may cause the same issue to happen repeatedly. If you have noticed warning lights or messages, or if the problem happened after you've driven your vehicle for a while, it may be time to decide whether to seek service at a dealer. Servicing the battery or related components can resolve the issue, but sometimes deeper electrical or power problems are the point of failure. Warranty coverage may apply for certain repairs, so check with our Jeep dealers in Saline, MI, for more information. Always make sure your batteries and electrical systems are in fine working order if the system is not functioning as expected.
Smarter Driving Starts with Jeep
Whether you're climbing rugged trails or coasting through your daily grind, Jeep's Stop-Start System is a smart companion on the road to better fuel economy and environmental awareness. It's one more way Jeep empowers you to go farther efficiently, responsibly, and without sacrificing the performance you love. Test it out from our Jeep lineup at Genthe CDJR to discover how a small change can deliver big savings!
* The advertised price does not include sales tax, vehicle registration fees, other fees required by law, finance charges and any documentation charges. A negotiable administration fee, up to $115, may be added to the price of the vehicle.
* Images, prices, and options shown, including vehicle color, trim, options, pricing and other specifications are subject to availability, incentive offerings, current pricing and credit worthiness.
Make an Inquiry
* Indicates a required field
-
Genthe Chrysler Dodge Jeep Ram
900 W Michigan Ave
Saline, MI 48176-1464
- Sales: (734) 429-9431
Loading Map...